#Lq4 prc2.5 heads flycut pistons full#
#Lq4 prc2.5 heads flycut pistons series#
#Lq4 prc2.5 heads flycut pistons free#

The rotocast method (also used on the LSA) and the use of A356T6 alloy make this a stronger casting that is better at handling the added heat generated from a supercharger. Though they bare plenty of resemblance to the LS3, the LS9 head has a number of features that make them more suitable for boosted applications. The formula for building the most powerful factory GM engine ever was fairly simple: Add a supercharger to the LS3 and beef it up considerably. These heads are available for a scant $375 from Chevrolet Performance dealers, making them an excellent bang for the buck. The massive intake valves necessitate a 4-inch-or-larger bore with no other special consideration needed. The L92 head was the first to boast 330 cfm while being dirt cheap, which started the craze. Though sacrifices were made for emissions, you wonвЂ™t find a higher-flowing head for the money. A better casting was used for added strength on the supercharged LSA, but it is also mostly unchanged since its original inception. Only one significant change was made for use on the LS3 engine in the Corvette, Camaro, and G8 GXPвЂ“hollow-stem valves. These mini-LS7 heads debuted in Australia first in the 2006 Holden Commodore (among others) as the L76 and L98, but are most commonly known for their debut on the 2007 EscaladeвЂ™s L92. These heads are available at any Chevrolet Performance dealer for around $1,500. And the large valves necessitate a 4.125-inch or larger bore, and otherwise bolt right up with LS7-specific intake manifold bolts. The large, raised runners and 12-degree valve angle enable substantial flow that supports large cubic inches. Right out of the box, these heads have supported more than 600 hp naturally aspirated and substantially more with forced induction. Titanium intake valves and sodium-filled exhaust valves were previously unheard of in a domestic factory engine, which revved to 7,200 rpm, another anomaly for a pushrod V-8.

Although common in the aftermarket, CNC-porting of the intake and exhaust runners is usually too costly for a factory head. These were the first heads to bring race car quality and technology to the OEM side. You can copy and paste this link to share:

#Lq4 prc2.5 heads flycut pistons free#

SHARE THIS ARTICLE:В Please feel free to share this article on Facebook, in Forums, or with any Clubs you participate in. For a comprehensive guide on this entire subject you can visit this link: LEARN MORE ABOUT THIS BOOK HERE

#Lq4 prc2.5 heads flycut pistons full#

This Tech Tip is From the Full Book, HIGH-PERFORMANCE GM LS-SERIES CYLINDER HEAD GUIDE. However, the aftermarket can achieve the performance potential of a race head that is compatible with factory intake and exhaust patterns. Factory heads have design compromises for emissions and cost (obviously missing from aftermarket designs) and are optimized for low-lift camshafts and other OEM components. However, aftermarket castings boast designs more suitable for both more extreme applications and street cars looking for better torque. ( Summit RacingвЂ™sВ Brian Nutter and Paul Spurlock contributed to this article.Rectangular port heads boast a clear advantage in the flow department and are ideal for high-RPM, big-cubic-inch, and purpose-built drag racing applications.ДЇactory castings are capable of 360 to 400 cfm when ported properly, which can make it difficult to justify an aftermarket casting. You can explore all of our LS engine spec guides and LS tech resources here. This guide is specifically for the GM LQ4 engine.

#Lq4 prc2.5 heads flycut pistons series#

Summit Racing has created a series of comprehensive guides for each engine in the LS family, so engine builders and tuners can have a handy reference for their projects. The aftermarket is strong, crate enginesВ are available, and used motors are often cheaply sourced through junkyards. These motors are capable of making a lot of horsepower, and respond well to upgrades like turbos, superchargers, high-flow cylinder heads, intake systems, cams, and nitrous oxide. Since LS and Vortec engines are so common, theyвЂ™ve become the go-to performance and swap engines of the modern era. Mechanically similar, General MotorsвЂ™ LS and LS-based Vortec enginesВ wound up on almost every branch of the GM family tree: Chevy, Pontiac, GMC, Cadillac, Buick-heck, even Saab, Hummer, and Isuzu got some LS love. The engine specs and information listed here is for the stock LQ4 engine. For marketing purposes, it was also known as the Vortec 6000. 3) small block engine used in GM trucks between 19.